Introduction

The Dayton Audio BSA-200 high power bass shaker amplifier is designed and built specifically to power tactile transducers but works equally as well as a dedicated subwoofer amplifier. Its small form factor makes it perfect for tight spaces, while the included brackets allow for vertical or horizontal mounting. The frequency and balance knobs let you dial in the desired crossover point and output, giving you total control over your set-up.

Main Features

• Sleek modern design looks good and saves space
• Robust 2 ohm minimum impedance provides maximum output to bass shakers
• RCA line in and out for daisy chaining multiple units
• Adjustable 50-200 Hz low pass crossover for seamless audio integration
• Built-in USB port for powering 5V devices or use with wireless Dayton Audio Wave-Link technology

Specifications

• Output power: 110 watts RMS per channel @ 2 ohms, 230 watts RMS @ 4 ohms (minimum impedance) bridged mono
• Input sensitivity: 170 mV
• Frequency Response: 5-200 Hz +/- 3 dB
• Variable low pass: 50-200 Hz
• Total harmonic distortion (stereo): 1%, (mono): 0.05%
• Signal to noise ratio: 91dB @ 100 Hz A-weight
• Power requirements: 110-240 VAC
• Max power consumption: 313W
• Stand-by power rating: 0.5W
• Auto turn-on sensitivity: 10 mV
• Dimensions: 2.5″H x 9.5″W x 8.5″D

Frequently Asked Questions

Can the Dayton Audio BSA-200 be used with other audio equipment?

Yes, the Dayton Audio BSA-200 can be used with other audio equipment. It has RCA line in and out for daisy chaining multiple units, allowing you to integrate it seamlessly into your audio setup.

What is the power output of the Dayton Audio BSA-200?

The Dayton Audio BSA-200 has an output power of 110 watts RMS per channel at 2 ohms and 230 watts RMS at 4 ohms when bridged mono. This ensures maximum output to your bass shakers or subwoofers.

Does the Dayton Audio BSA-200 come with a remote control?

Yes, the Dayton Audio BSA-200 comes with a remote control. The remote allows you to adjust the frequency, balance, and other settings from a distance, providing convenience and ease of use.

Can the Dayton Audio BSA-200 power other devices?

Yes, the Dayton Audio BSA-200 has a built-in USB port that can be used to power 5V devices. This feature is especially useful if you want to use it with the Dayton Audio Wave-Link wireless system (not included).

What is the size of the Dayton Audio BSA-200?

The Dayton Audio BSA-200 has dimensions of 2.5″H x 9.5″W x 8.5″D. Its compact size makes it ideal for installations in tight spaces.