Release Date: December 21, 2021
All Windows 10 pre-installed PCs listed below are tested for Windows 10 November 2021 Update (Version 21H2).
There are some important matters and restrictions.
As for detailed, we will update the Support Web page sequentially.
Please note that contents are subject to change without notice.
- Update from "Windows 10 Pre-installed" PC
- Update from "Windows 10 upgraded from Windows 8.1 / Windows 7" PC
- All Previous Windows 10 Support Information
The following models may not be able to update to Windows 10 November 2021 Update.
Please apply the countermeasure version of SD Card driver with the following page.
Target Model : CF-LV8[R/S] (mk1), CF-SV8R (mk2 Asia-model) series
BayHub SD Card Driver Update Program (1.1.101.1033)
Please apply the countermeasure version of Intel® Rapid Storage Technology driver with the following page.
Target Model : CF-33[A/B/C/L/M/N/V/W] (mk1), CF-54[G/H/J] (mk3), CF-LX6[T/Y] (mk3), CF-SZ6R (mk2 Asia-model), CF-XZ6R (mk1) series
Intel® Rapid Storage Technology Update Program (16.7.9.1027)
Target Model : CF-20[A/B/C/D] (mk1), CF-33[D/E/P/Q] (mk1), CF-54[D/E/F] (mk2), CF-D1[N/Q] (mk3), FZ-G1[P/Q/R/S/T] (mk4), FZ-M1[EAF/ECF] (mk2), FZ-M1F (mk2), FZ-Q2[F/G] (mk1) series
Intel® Rapid Storage Technology Update Program (15.9.4.1041)
Please apply the countermeasure version of video driver with the following page.
Target Model : FZ-M1[G/J], FZ-G1[U/V/W] series
Intel® Video Driver Update Program
Update from "Windows 10 Pre-installed" PC
- Product List
- Support Evaluation Information
- Product List
-
CF-20 [A/B/C/D] (mk1)
CF-20 [E/F/G/H] (mk2)
CF-31 [1/2/3/4] (mk5)
CF-31 [6/7/8/9] (mk6)
CF-33 [A/B/C/L/M/N/V/W] (mk1)
CF-33 [D/E/P/Q] (mk1)
CF-33 [G/J/K/R/S/X/1/2/3] (mk2)
CF-53 [2/3/4/5/7] (mk4)
CF-54 [A/B/C] (mk1)
CF-54 [D/E/F] (mk2)
CF-54 [G/H/J] (mk3)
CF-C2C (mk2.5)
CF-D1 [N/Q] (mk3)
CF-LV8 [R/S] (mk1)
CF-LX6 [T/Y] (mk3)
CF-MX4E (mk1)
CF-SV1R (mk2 Asia-model)
CF-SV8R (mk2 Asia-model)
CF-SX4E (mk1 Asia-model)
CF-SZ6R (mk2 Asia-model)
CF-XZ6R (mk1)
FZ-55 [A/B/C] (mk1)
FZ-55 [D/E/F] (mk2)
FZ-G1 [J/K/L/M/N] (mk3)
FZ-G1 [P/Q/R/S/T] (mk4)
FZ-G1 [U/V/W] (mk5)
FZ-G2 [A/B/C/D] (mk1)
FZ-M1D (mk2 Value)
FZ-M1ECD (mk2 Value)
FZ-M1 [EAF/ECF] (mk2)
FZ-M1F (mk2)
FZ-M1G (mk3 Value)
FZ-M1J (mk3)
FZ-Q2 [F/G] (mk1)
FZ-Y1 [C/D] (mk2)
* eg. please read "CF-20 [A/B/C/D]" as the "CF-20A, CF-20B, CF-20C and CF-20D series".
- Support Evaluation Information
-
Model
Select model to check important matters and restrictions following the Windows 10 November 2021 Update.
Important Matters
No.1 Intel® WiDi software
Use Intel® WiDi.
Target Models
CF-20 [A/B/C/D]
CF-31 [1/2/3/4]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-C2C
CF-D1 [N/Q]
CF-MX4E
CF-SX4E
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-Y1 [C/D]
Compatibility
Intel® WiDi is not supported after Windows 10 Version1607 [Anniversary Update] (including Version 21H2 [November 2021 Update]).
Please refer this site:
Product Discontinuation Notice for Intel® WiDi and Intel® Pro WiDiBefore using miracast, please confirm that the miracast adapter supports Windows 10.
No.2 Video(GFX) driver
Use Miracast connection.
Target Models
CF-53 [2/3/4/5/7]
CF-C2C
Compatibility
If Video(GFX) Driver's version is older than 20.19.15.4463, there is a case that PC hangs when using Miracast connection after resuming from sleep.
Please update Video(GFX) Driver with the following page.
Video(Gfx) DriverNo.3 EVE FA Standalone for Panasonic
Using the Microsoft Account.
Target Models
CF-20 [A/B/C/D]
CF-31 [1/2/3/4]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-C2C
CF-MX4E
CF-SX4E
* Fingerprint sensor mounted model
Compatibility
Unable to authenticate fingerprint for Microsoft account.
Please update "EVE FA Standalone for Panasonic" with the following page.
EVE FA Standalone for PanasonicNo.4 BitLocker
Turn on BitLocker for Operating system drive.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
[Applicable when BitLocker is enabled]
NumLock may be automatically turned to ON on BitLocker PIN input screen.
Please confirm NumLock status and change it if necessary before entering PIN.
No.5 SD Card
Eject SD Card using "Safely Remove Hardware and Eject Media" menu.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-XZ6R
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
Compatibility
When insert SD card and select "Eject USB Drive" from "Safely Remove Hardware and Eject Media" menu in task tray icon, there is no reaction and can't complete shutdown.
Please update the SD Driver with the following page.
In the case of FZ-M1 series, update is not necessary when optional SD slot is not equipped.
SD Card Reader Driver (USB)No.6 SD Card
Eject SD Card using "Safely Remove Hardware and Eject Media" menu.
Target Models
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
Compatibility
When insert SD card and select "Eject USB Drive" from "Safely Remove Hardware and Eject Media" menu in task tray icon, there is no reaction and can't complete shutdown.
Please update the SD Driver with the following page.
SD Card Reader Driver (PCIE)Restrictions
No.1 Wireless LAN
Connect specific setting Wi-Fi router (11gn).
Target Models
CF-20 [A/B/C/D]
Compatibility
Wireless LAN connection to Wi-Fi router (11gn) sometimes gets disconnected unexpectedly.
Please change the following setting.
- Go to Advanced of "Intel Dual Band Wireless AC 8260" in device manager, then change "802.11n channel width for 2.4GHz" setting from "Auto" to "20 MHz Only".
- Go to BIOS Setup menu, then change "SuperSpeed USB" → "Keyboard Base and Port Replicator" to "Disable".
No.2 Realtek Sound driver
Update to Windows 10 November 2021 Update.
Target Models
CF-MX4E
CF-SZ6R
CF-XZ6R
Compatibility
The volume of quieter sound becomes low.
After updating to Windows 10 November 2021 Update, Loudness Equalization changes from "enabled(=factory default setting)" to "disabled" at Speakers Properties.
Change Loudness Equalization from "disabled" to "enabled(=factory default setting)" at Speakers Properties.
[Modification procedure]
- Right-click speaker icon on the task tray and click [Playback devices].
- Double-click [Speakers].
- Click [Enhancements].
- Put checkmark on [Loudness Equalization] and click [OK].
- Click [OK] to close [Sound] window.
No.3 Apps & features
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-D1 [N/Q]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-Q2 [F/G]
Compatibility
Cannot click "Uninstall" button for specific applications at "Apps & features".
- System Interface Manager
- Wireless Toolbox
- Btup Service
- Devup Service
- Wireless Helper Service
- Wireless Switch Utility
- Device Control Utility
- Keyboard Base LAN Setting Utility
When update to the Windows 10 November 2021 Update, The driver (that is work with those applications) is re-installed. Then settings to display those applications on the list has been rewritten.
Please do not uninstall those applications.
No.4 HOLD Button and HOLD Key
Update to Windows 10 November 2021 Update.
Target Models
CF-C2C
CF-LX6 [T/Y]
CF-MX4E
Compatibility
The toast notification is not displayed when HOLD mode is enabled.
Please add the checkmark to "Show notification when HOLD mode is enabled" to display a notification screen when HOLD mode is enabled.
No.5 Wireless WAN Driver
WWAN may be automatically connected.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
* WWAN mounted model
Compatibility
WWAN may be automatically connected when "Let Windows manage this connection" on VAN UI (View Available Networks UI) is checked off.
Turn off Cellular when WWAN connection is not used.
(Video) How to get the Windows 10 November 2021 UpdateNo.6 Detaching the Tablet from the Keyboard Base
Operation of slide switch or pressing of hot-key.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-XZ6R
Compatibility
When slide switch operated or hot-key (*1) pressed, toast message not displayed.
*1 CF-20, CF-XZ6 : "Fn"key + "1"
CF-33 : "Fn"key + "ESC"keyWait for a second and confirm "Problem Undocking From Keyboard Base" message not displayed before detaching tablet.
No.7 Attaching the tablet to the keyboard base
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-XZ6R
Devices installed in the keyboard base may not work, when attaching the tablet to the keyboard base by clicking "Fn" key + "1" key (In the case of CF-33, "Fn" Key + "Esc" Key).
Further more, when port replicator is attached to keyboard base, devices installed in the port replicator may not work, too.Slide the release lever to detach the tablet from keyboard base, and attach the tablet to the keyboard base.
No.8 Panasonic PC Settings Utility
Update to Windows 10 November 2021 Update.
Target Models
CF-LX6 [T/Y]
CF-MX4E
CF-SX4E
CF-SZ6R
CF-XZ6R
Compatibility
Display mode is not switched to "Duplicate".
To switch to "Duplicate", please do one of the following.
- Click "Fn" key + "F3" key.
Select [Duplicate]. - Click [Start]-[Settings]-[System]-[Display].
Select [Duplicate these displays] at [Multiple displays].
No.9 Panasonic PC Settings Utility
Update to Windows 10 November 2021 Update.
Target Models
CF-LX6 [T/Y]
CF-MX4E
CF-SZ6R
CF-XZ6R
Compatibility
Power Saving Settings in Panasonic PC Settings Utility, power plan can be selected from Standard or Power Save.
In the case of Version 1703 [Creators Update] or before, it can be selected from 5 power plans.It is restriction due to specification change in OS.
No.10 Panasonic PC Settings Utility
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
See AlsoInformativo comentado: Informativo 625-STJ (RESUMIDO · PDF fileIniciou-se a execução penal quanto ao crime òA ó. João poderá aproveitar o tempo que ficou preso - [PDF Document]This is Really Happening: Fun With ForumsИгры спанч боб футбол, игра — Хроники ЗайчегаGta Namaste America Game Download For PcCF-33 [D/E/P/Q]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-MX4E
CF-XZ6R
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
* Touch Screen mounted model
Compatibility
- All Target Models
At Panasonic PC Settings Utility → Settings → Touch Screen.
Can't change Touch Screen mode because Touch Screen mode will not be displayed.
And Touch Screen mode return to default mode, therefore Pen input can't be used in some models. - CF-20, CF-33, CF-54, CF-MX4E, CF-XZ6R
In the case that the setting is made so that the system does not go to sleep, when the display is closed, the function to automatically stop touch panel input does not work properly, so when the display is closed, or when the display is subsequently opened, incorrect touch panel input may occur.
Please update "System Interface Manager" with the following page.
System Interface ManagerNo.11 Panasonic PC Settings Utility
After updating System Interface Manager in the procedure of Restriction No.10.
Target Models
CF-54 [A/B/C]
CF-54 [D/E/F]
After updating System Interface Manager in the procedure of restriction No.10, and setting Touch Screen on Panasonic PC Settings Utility, it displays "Settings Failure" error message.
However, the setting has been changed to the specified mode.Please update "Panasonic PC Settings Utility" with the following page.
Panasonic PC Settings UtilityNo.12 Panasonic PC Settings Utility
Update to Windows 10 November 2021 Update.
Target Models
CF-MX4E
CF-XZ6R
At Panasonic PC Settings Utility → Settings → Button / Key → HOLD Button.
Can't disable Touch Screen.Please update "System Interface Manager" with the following page.
System Interface ManagerNo.13 Panasonic PC Settings Utility
Update to Windows 10 April 2018 Update or later from Fall Creators Update or earlier.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-MX4E
CF-XZ6R
* Touch Screen mounted model
Compatibility
- When close and open the display, incorrect touch panel input may occur.
- In the case that the setting is made so that the system does not go to sleep, when the display is closed, the function to automatically stop touch panel input does not work properly, so when the display is closed, or when the display is subsequently opened, incorrect touch panel input may occur.
Please update "System Interface Manager" with the following page.
System Interface ManagerNo.14 Panasonic PC Settings Utility / Panasonic PC Recovery Disc Creation Utility
Launch Panasonic PC Settings Utility or Panasonic PC Recovery Disc Creation.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
(1)After launch Panasonic PC Settings Utility by a standard user, the application cannot be relaunched as administrator.
(2)Panasonic PC Recovery Disc Creation Utility cannot be launched by a standard user, or it can be started but an error occurs and only be ended by a standard user.
(1)(2)It's restriction.
(If it need to execute this operation, please switch to Administrator user.)No.15 Panasonic PC Settings Utility
Launch Panasonic applications from Panasonic PC Settings Utility.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
Panasonic applications cannot be launched from Panasonic PC Settings Utility.
Launch the application from start menu.
No.16 Concealed mode
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
FZ-Q2 [F/G]
Compatibility
There may be cases can't disable Touch Screen even if enable Concealed mode.
Please update "System Interface Manager" with the following page.
System Interface ManagerNo.17 DisplayLink (Graphics Driver)
Connect an external monitor to DisplayLink port on peripheral devices.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
If you connect an external monitor to HDMI / DisplayPort / VGA port(*1) on peripheral devices(cradle, keyboard base, etc.) and set display mode to "Second screen only", applications using OpenGL may not be displayed properly.
*1 except for FZ-Y1 [C/D] series
Please switch display mode to "Duplicate" or "Extend".
No.18 DisplayLink
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-53 [2/3/4/5/7]
(Video) Windows 10 21H2, November 2021 Update: Upgrade with Media Creation ToolCF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
After update to November 2021 Update, "DisplayLink Graphics Driver is no longer available" toast will be shown.
But it wasn't deleted, and available.Even if the toast is shown, the application wasn't deleted, and available.
No.19 DisplayLink
Connect external monitor to DisplayLink HDMI/VGA port.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
FZ-55 [A/B/C]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
After updated to Windows 10 November 2021 Update, if connect external monitor to DisplayLink HDMI/VGA port, external monitor doesn't display.
It can be fixed by one of the following methods.
Right click C:\util\drivers\dlink\pinstall (if the file name extension is displayed, C:\util\drivers\dlink\pinstall.bat) and select "Run as administrator".
Wait until the command prompt window disappears.
After the command prompt is disappeared, restart the PC.
After the restart is complete, the necessary drivers are loaded and external monitor will be able to display.No.20 Application
After execute system restore, launch the UWP application.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
After execute system restore, UWP application can't open and error message will be shown.
The following error may occur.
"This app can't open. Check the Windows Store for more info about xxxxx (application name)."Once sign-in after sing-out, you can launch the UWP application.
No.21 Touch keyboard
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
See AlsoAktuelle VerkehrsmeldungenList of Tuition Free Online Universities for International Students 2022Download Intel Chipset SATA/PCIe RST Premium Controller Storage Controller Drivers for Windows 11, 10, 8.1, 8, 7, Vista, XP - 64-bit and 32-bitСмотреть Мультфильм Губка Боб Все Серии На УкраинскомCompatibility
Touch keyboard can't be shown.
Make [Show touch keyboard button] enable in the menu shown by Right-Clicking taskbar.
No.22 Windows Hello
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-C2C
CF-LV8 [R/S]
CF-SV1R
CF-SV8R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
* IR Camera mounted model or Fingerprint sensor mounted model
Compatibility
When sign in using Microsoft account (doesn't set up Windows Hello) with no internet connection, Windows Hello settings are displayed but it can't proceed by "You'll need the Internet for this." message.
Connect internet before sign in, or click [Cancel] on error screen to sign in.
No.23 Windows Hello (Face Authentication)
Setup Face Authentication, and restart PC or power on from shutdown state.
Target Models
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-LV8 [R/S]
CF-SV1R
CF-SV8R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
* Face authentication corresponding model
Compatibility
Face Authentication doesn't work when execute restart or power on from shutdown state.
The face authentication will be available by one of the following methods.
- Click Sign in option and select Face Authentication icon, there is a case that Face Authentication will be start.
(If it doesn't recover by above method)
- Wait 3 to 4 minutes, the face authentication will be available. If you need to sign in before it, please select Password or PIN icon of Sign in option, and input password or PIN.No.24 Windows Hello (Face Authentication)
Setup Face Authentication, and restart PC or power on from shutdown state.
Target Models
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-LV8 [R/S]
CF-SV1R
CF-SV8R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
* Face authentication corresponding model
Compatibility
Face Authentication will be started after warning message displayed when power on from shutdown state or execute Restart.
It is restriction.
No.25 Windows Hello (Face Authentication)
Execute Windows Hello face authentication settings.
Target Models
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-LV8 [R/S]
CF-SV1R
CF-SV8R
CF-XZ6R
FZ-55 [D/E/F]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
* Face authentication corresponding model
Compatibility
When execute Windows Hello face authentication settings, the preview screen shows the monochrome image or shows view of rear camera.
It is restriction.
The face registration will be normally done, even if this phenomenon occurs. Please use as it is.No.26 Finger Print
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-C2C
* Fingerprint sensor mounted mode
Desktop screen can't be shown automatically when you enable Single Sign-On of Fingerprint Authentication (EVE FA Standalone) and start PC with Fingerprint Authentication.
Key input or mouse click is needed to pass the lock screen and the sign-in screen, but in some case it needs Fingerprint Authentication again.
No.27 System Protection
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
(Video) Windows 10 21H2: Update Assistant install process (November 2021 Update)CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
The settings of System Protection turned off automatically.
Start → Settings → System → About → Click System Info.
Click System Protection and confirm Protection Settings of C drive.
If Protection Settings of C drive is "Off", select C drive and click [Configure].
And select "Turn on system protection" and click [OK].No.28 Focus assist
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
When using application with full screen mode or connect external display and set mode to duplicate mode, notification will not be displayed even if execute [Fn] + [F9] (display Battery Level), or other operation to display notifications.
Open Focus assist settings (Start → Settings → System → Focus Assist) and change settings of Automatic rules.
No.29 Disk Management
Update to Windows 10 November 2021 Update and Open Disk Managemrnt.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
Drive letter may be added to recovery partition, and the drive can be seen by Explorer.
And warning of storage area may be shown.
If delete the data of the drive, it can not execute recovery.It is restriction.
If drive letter is added to recovery partition, and if warning of storage area is shown, please don't delete the data of the drive.No.30 2D Barcode Key Emulator
Update to Windows 10 November 2021 Update and re-install the application.
Target Models
CF-C2C
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
* Barcode reader mounted model
Compatibility
After updating the OS to Windows 10 Version November 2021, and re-install 2D Barcode Key Emulator, can't launch 2D Barcode Key Emulator.
Please update "2D Barcode Key Emulator" with the following page.
2D Barcode Key EmulatorNo.31 Bluetooth
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
When connecting bluetooth keyboard, if enter wrong PIN twice, the new PIN will be never displayed.
After connection operation repeatedly, "Enter the PIN for Bluetooth Keyboard." message and input field will be displayed.
Input arbitrary digits and click [Connect], and enter the same digits to your Bluetooth Keyboard, the connection will be done.No.32 Software Keyboard
Update to Windows 10 November 2021 Update, and windows sign-in password is set and the state is tablet.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-D1 [N/Q]
CF-MX4E
CF-XZ6R
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
Software Keyboard may not shown on sign-in password input screen at resuming PC with tablet state.
Touch the text box of inputting password twice.
No.33 Brightness of LCD
Update to Windows 10 November 2021 Update, and checking "Change brightness automatically when lighting changes".
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
There are cases where Brightness of LCD is only maximized or minimized with checking "Change brightness automatically when lighting changes".
It's restriction.
Uncheck "Change brightness automatically when lighting changes" of [Start] - [Settings] - [System] - [Display].No.34 Graphics settings
Connect external HDMI / VGA monitors.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
(Video) Install Windows 10 21H2 Update || Windows 10 November 2021 UpdateCF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
Connect external HDMI / VGA monitors, Settings application may end when switched Multiple displays in Settings application.
If Settings application end, open Setting application again and switch the display destination of multiple display.
For keyboard-equipped models, you can also switch using Fn + F3.No.35 Panasonic PC Camera Utility
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-D1 [N/Q]
CF-LX6 [T/Y]
CF-SZ6R
CF-XZ6R
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Only for models that installed Panasonic PC Camera Utility for Microsoft Store version Ver.1.0.2001.0 or older version.
Compatibility
- The preview may not be displayed correctly when rotating the screen.
- Flash photography time may be long.
Install newest version at Microsoft Store.
No.36 Video Playback
Playback a movie file using "Movies & TV" app.
Target Models
CF-20 [A/B/C/D]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-54 [D/E/F]
CF-D1 [N/Q]
CF-LX6 [T/Y]
CF-SZ6R
CF-XZ6R
FZ-G1 [P/Q/R/S/T]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-Q2 [F/G]
Compatibility
When playback a movie file using "Movies & TV" app, there is a case to be corrupt the playback image.
Please use Windows Media Player to play such movies.
- Right click the movie file.
- Select "Open with" → "Windows Media Player".
No.37 Power Options
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-33 [G/J/K/R/S/X/1/2/3]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV1R
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-55 [D/E/F]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-G2 [A/B/C/D]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
Unnecessary setting item (Intel® Dynamic Platform and Thermal Framework Settings or Intel® Dynamic Tuning Settings) is displayed at "Change advanced power settings" of Power Options.
If this setting is displayed, there is no problem. However, please do not change this setting. This setting can be hidden by the following procedure.
- If you have changed Intel® Dynamic Platform and Thermal Framework Settings or Intel® Dynamic Tuning Settings, please execute the following procedure to all power plans.
Otherwise skip to 2.
Right click battery icon on task bar → Power Options → Change plan settings → Change advanced power settings → Click [Restore plan defaults] button → Click [Yes] button → Click [OK] button. - Launch File Explorer → PC → Windows (C:) → util → drivers → dptf (Depending on the model, it will be dptf_rs5 or chtpack instead of dptf.)
- Double click pplan_dptf (if file name extension is displayed, pplan_dptf.bat)
No.38 Intel® Graphics Control Panel
Launch Intel® Graphics Control Panel.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-31 [1/2/3/4]
CF-31 [6/7/8/9]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-53 [2/3/4/5/7]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
CF-C2C
CF-D1 [N/Q]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV8R
CF-SX4E
CF-SZ6R
CF-XZ6R
FZ-55 [A/B/C]
FZ-G1 [J/K/L/M/N]
FZ-G1 [P/Q/R/S/T]
FZ-G1 [U/V/W]
FZ-M1D
FZ-M1ECD
FZ-M1 [EAF/ECF]
FZ-M1F
FZ-M1G
FZ-M1J
FZ-Q2 [F/G]
FZ-Y1 [C/D]
Compatibility
"Download the latest Intel® Graphics Driver" link will be shown at Support page of Options and Support.
Drivers downloaded from this link are not validated by us.
Therefore, please don't use these drivers.
And please use drivers downloaded from our support page.No.39 PowerDVD14 / PowerDVD12
Operate PowerDVD.
Target Models
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-MX4E
CF-SV8R
CF-SX4E
CF-SZ6R
* Optical drive mounted model only.
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-54 [G/H/J]
FZ-55 [A/B/C]
* Only when the optical drive option is installed.
Compatibility
PowerDVD can not be operated.
Please do not change the display destination or connect / disconnect the external display during DVD playback.
And Please do not operate PowerDVD with the keyboard (please use the mouse or the touchpad).
If this phenomenon occurs, right click program icon on task bar, and select "Close window" to close the application, and re-launch application.
During full screen playback, it is possible to display the taskbar by pressing the Windows key on the keyboard. At this time, the mouse cursor may not be displayed in the area where the image of PowerDVD is displayed, so it is necessary to move the mouse cursor to the area where the taskbar or start menu is displayed.Also, it is possible to avoid this phenomenon by setting as below.
- Launch "Settings".
- Select "Time & Language".
- Select "Language".
- Select the language you prefer to use in "Preferred languages" and then click "Options".
- Select Input method in "Keyboards" and then click "Options".
- Select "General"
- Turn on "Use previous version of ..." in "Compatibility"."
No.40 Barcode power management setting tool
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
Compatibility
Energy consumption of a barcode reader increases.
If the PC has a barcode reader and C:\util\drivers\bcrpm folder exists, reset the registry settings according to the following procedure.
If the folder does not exist, the registry settings are not required for the PC.[Reset the registry settings]
- Launch Explorer and open "C:\util\drivers\bcrpm" folder.
- Right-click the setting tool "Pinstall.bat" and select "Run as administrator".
If "User Account Control" or "Are you sure you want to continue?" pop-up is shown, click "Yes" button to proceed.
No.41 SD Card
Insert a UHS-II card.
Target Models
CF-LV8 [R/S]
CF-SV1R
CF-SV8R
Compatibility
It may occur when a UHS-II card is inserted in the PC, transfer speed decreases.
Reset the registry settings according to the following procedure.
[Reset the registry settings]
- Launch Explorer and open "c:\util\drivers\sd_o2" folder.
- Double-click "storeport_power_wait_time_500ms.reg".
If "User Account Control" or "Are you sure you want to continue?" pop-up is shown, click "Yes" button. - Restart your PC.
No.42 Removing the docking device
Update to Windows 10 November 2021 Update.
Target Models
CF-20 [A/B/C/D]
CF-20 [E/F/G/H]
CF-33 [A/B/C/L/M/N/V/W]
CF-33 [D/E/P/Q]
CF-XZ6R
Compatibility
When trying to remove the docking device by using "Safely Remove Hardware" function, a message window may appear to inform that the removal may not be possible.
Please execute Undocking Notification Disable Utility with the following page.
Undocking Notification Disable UtilityNo.43 Intel® Rapid Storage Technology
Check if the optical drive is recognized.
Target Models
CF-31 [6/7/8/9]
CF-54 [A/B/C]
CF-54 [D/E/F]
CF-LV8 [R/S]
CF-LX6 [T/Y]
CF-SV8R
CF-SZ6R
* Optical drive mounted model only.
Compatibility
Optical drive of some models may not be recognized.
For the models with optical drive, reset the registry settings according to the following procedure.
- Launch Explorer and open "c:\util\drivers\rst" folder.
- Doble-click all registry setting files (Controller0Phy0ANEnable.reg, Controller0Phy1ANEnable.reg, Controller0Phy0ANEnable_AC.reg, Controller0Phy1ANEnable_AC.reg).
- If "User Account Control" or "Are you sure you want to continue?" pop-up is shown, click "Yes" button to proceed.
- Depending on the model, there is a case that all registry setting files or some registry setting files do not exist in that folder.
- For the non-existent registry setting files, you do not need to re-set.
- Restart your PC.
No.44 Power saving settings
Update to Windows 10 November 2021 Update.
Target Models
CF-LV8 [R/S]
CF-SV8R
FZ-55 [A/B/C]
Compatibility
Power saving settings are changed after updating to Windows 10 November 2021 Update.
By applying Panasonic Power Saving Control Package, the optimal power saving settings will be applied.
Please execute Panasonic Power Saving Control Package with the following page.
Panasonic Power Saving Control Package
* Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the US and/or other countries.
* Other company names, product names or other names noted in this page are registered trademarks or trademarks of the respective companies.
Update from "Windows 10 upgraded from Windows 8.1 / Windows 7" PC
- Product List
- Support Evaluation Information
- Product List
-
CF-19Z (mk8)
CF-31 [1/2/3/4] (mk5)
CF-53 [2/3/4/7] (mk4)
CF-54 [A/B/C] (mk1)
CF-AX3E (mk2)
CF-C2C (mk2)
CF-H2 [P/Q/R/S] (mk3)
CF-LX3 [E/J] (mk2/mk3)
CF-MX4E (mk1)
CF-SX4E (mk1 Asia model)
FZ-G1 [A/F/J/K/L] (mk1/mk2/mk3)
FZ-M1 [A/C] (mk1)
FZ-Q1 [A/C] (mk1)
UT-MB5 (mk1)
UT-MA6 (mk1)
FZ-Y1 [C/D] (mk2)
* eg. please read "CF-31 [1/2/3/4]" as the "CF-311, CF-312, CF-313 and CF-314 series".
Product models other than the above list is the Windows 10 Upgrade excluded.
Evaluation information, and does not support, such as Windows 10 compatible drivers.
Please use as it is without updating. - Support Evaluation Information
-
Important matters and restrictions due to the application of the program are currently being prepared.
* Microsoft® and Windows® are either registered trademarks or trademarks of Microsoft Corporation in the US and/or other countries.
* Other company names, product names or other names noted in this page are registered trademarks or trademarks of the respective companies.
Resources
For more information about the Windows updates, please visit the Microsoft support site.
FAQs
How long will Windows 10 21H1 be supported? ›
Windows 10, version 21H1 will reach the end of servicing on December 13, 2022. This applies to all editions of Windows 10, version 21H1, released in May of 2021: Windows 10 Enterprise, version 21H1. Windows 10 Enterprise multi-session, version 21H1.
How long will Windows 10 be supported with updates? ›Beginning with Windows 10, version 21H2 (the Windows 10 November 2021 Update), feature updates will be released annually in the second half of the year via the General Availability Channel. Go here to learn more. Microsoft will continue to support at least one Windows 10 release until October 14, 2025.
How do I get the Windows 10 November 2021 update? ›When the Windows 10 November 2021 Update is ready for your device, it will be available to download from the Windows Update page in Settings. Choose a time that works best for you to download the update. You'll then need to restart your device and complete the installation.
What is 21H1 and 21H2? ›Windows 10, version 21H2 is the next feature update. This article lists the new and updated features IT Pros should know. Windows 10, version 21H2 is also known as the Windows 10 November 2021 Update. It includes all features and fixes in previous cumulative updates to Windows 10, version 21H1.
How long will 20H2 be supported? ›Windows 10 21H1/21H2 Support End Date
Windows 10 20H2 will reach the end of support on May 10, 2022.
During its announcements of the Windows 11 rollout, Microsoft reiterated that Windows 10 would remain supported until October 14, 2025. The company put it in writing, too, in a blog post(Opens in a new window) that confirms the date. This applies to both Home and Pro versions of Windows 10.
Can I keep Windows 10 forever? ›Microsoft will continue to support Windows 10 until Oct. 14, 2025. (The Windows 10 November 2021 update is now available.) That gives you about four years to prepare as Microsoft slowly moves its billion-plus Windows users to Windows 11.
What versions of Windows 10 are no longer supported? ›We recommend updating all of these earlier versions to the Windows 10, version 20H2 to continue receiving security and quality updates, ensuring protection from the latest security threats. Windows 10, version 1507, 1511, 1607, 1703, 1709, and 1803 are currently at end of service.
What happens if your operating system is no longer supported? ›An unsupported version of Windows will no longer receive software updates from Windows Update. These updates include security updates that can help protect your PC from harmful viruses, spyware, and other malicious software which can steal your personal information.
Should I update to 21H2? ›Is it safe to install Windows 10 21H2? The best answer is “yes,” when Microsoft released Windows 10 21H2 on November 16, the update was signed off as stable and safe to install on devices running versions 2004, 20H2, and 21H1.
How do I upgrade from 21H1 to 21H2? ›
Go to software download on microsoft.com. Click on update now to download the Update Assistant tool. Download the Update Assistant Tool. From there launch the newly-downloaded file and click on update now to update to version 21H2.
Should I update to Windows 10 21H1? ›Is it safe to install version 21H1? The best and short answer is “Yes,” since May 18, 2021, Windows 10 version 21H1 is considered stable and safe for installation on devices running version 20H2 or 2004.
What is difference between 20H2 and 21H1? ›This update also contains all features and fixes included in previous cumulative updates to Windows 10, version 20H2. Windows 10, version 21H1 is a scoped set of features for select performance improvements, enterprise features, and quality enhancements.
Why can't I update to Windows 10 21H2? ›Can't Install Windows 10 21H2 on PC! Solution 1: Restart Your Computer. Solution 2: Run Windows Update Troubleshooter. Solution 3: Repair Corrupt Windows Update Components.
Why is 21H2 not showing update? ›Fix 4: Run Windows Update Troubleshooter
Windows has a built-in tool that can help you solve some Windows update issues like Windows 10 21H2 not showing up. This tool is the Windows Update troubleshooter. Step 1: Press Windows + I to open Settings. Step 2: Go to Update & Security > Troubleshoot.
The Home and Pro editions of Windows 10, version 20H2 have reached end of servicing. The May 2022 security update, released on May 10, was the last update available for these versions.
Is 20H2 out of support? ›While the Windows 10 October 2020 Update has reached its end of service, later versions of the operating system will remain supported until 2025. Note that Windows 10 version 20H2 for Enterprise, Education, and IoT Enterprise will not reach their end of support until May 9, 2023.
Should I update 20H2 Windows? ›In fact, the next deadline is fast approaching: devices running version 20H2 (late 2020) will need to upgrade before 10 May 2022. After that date, none of Microsoft's security updates will be compatible. Continuing to use this version will leave your device vulnerable to any bugs, viruses and malware that emerge.
Is Windows 10 better than Windows 11? ›Windows 11 is worth the update for most people. It comes with a wide range of new features, performance improvements, and design changes. As the latest Windows OS, it usually gets more attention than Windows 10, too. There's not too much risk in upgrading to Windows 11, either.
Does Windows 11 run better than Windows 10? ›Windows 11 is the clear winner simply because it is a better version of something we've been using for years. It's a little bit faster, a little bit stronger, and a little bit smarter. That's the point of having these new versions come out.
How long will Windows 10 be supported after Windows 11? ›
Windows 11 is the newest version of Windows. However, Microsoft will continue to support Windows 10 until October 2025.
Can I still get Windows 10 for free 2022? ›How to Upgrade to Windows 10 for Free in 2022 - YouTube
Is Windows 7 end of life? ›Support for Windows 7 has ended
After 10 years, security updates and technical support for Windows 7 ended on January 14, 2020.
Windows 11 Will Be Safer Than Windows 10 From Every Angle
Security-focused hardware like TPM 2.0 and newer CPUs will enable features such as VBS and UEFI Secure Boot to guard users against exploits. That said, most Windows users are still using older machines.
As of September 2022, version 21H2 (also known as Windows 10 November 2021 Update) is the latest version of Windows 10.
What Windows operating systems are currently not supported? ›- Windows 1.0 through 95.
- Windows NT 3.1 through 4.0.
- Windows 98 and Windows 98 SE.
- Windows 2000.
- Windows Me.
- Windows XP, Windows XP Professional, and Windows XP 64-Bit Edition.
- Window Vista.
While it's not 100% clear how the fake Windows 10 updates are being circulated, these are distributed under various names, like Win10. 0_System_Upgrade_Software. msi and Security_Upgrade_Software_Win10. 0.
What happens if I don't update my computer? ›However, if you don't install any updates, your system will be prone to ransomware and malware infections. Besides the major operating system updates, Microsoft releases minor updates frequently. The Windows operating system checks for updates once per day, and typically, it won't find new ones.
Why you should avoid using an outdated or unsupported OS on your PC? ›According to research from BitSight, computers running on outdated operating systems are three times more likely to be vulnerable to data breaches. When your OS stops updating, the security patches also don't update, leaving your system to fall prey to ransomware, malware, and data breaches.
What is the risk of using unsupported software? ›By continuing to run on unsupported software, you are increasing your chances of a data breach, which in turn increases your risks of breaking such laws and regulations, leading to heavy fines and penalties.
How long will Windows 10 be supported after Windows 11? ›
Windows 11 is the newest version of Windows. However, Microsoft will continue to support Windows 10 until October 2025.
What versions of Windows 10 are no longer supported? ›We recommend updating all of these earlier versions to the Windows 10, version 20H2 to continue receiving security and quality updates, ensuring protection from the latest security threats. Windows 10, version 1507, 1511, 1607, 1703, 1709, and 1803 are currently at end of service.
How long will Windows 11 upgrade be free? ›How long will the free upgrade offer last? "The free upgrade offer does not have a specific end date for eligible systems. However, Microsoft reserves the right to eventually end support for the free offer. This end date will be no sooner than October 5, 2022."
How long will Windows 11 be supported? ›The Windows 11 End of Support Dates
The latest version of Windows 11 is version 22H2, released in October 2022. For the enterprise and education edition, Microsoft communicated October 2025 as the end date.
Released on Sept. 20, the first big update to the operating system is now available for download on your laptop or desktop. You may be wondering, though, should you install the upgrade? With all the new security, productivity, accessibility and gaming features, the answer is likely yes.
What happens if your operating system is no longer supported? ›An unsupported version of Windows will no longer receive software updates from Windows Update. These updates include security updates that can help protect your PC from harmful viruses, spyware, and other malicious software which can steal your personal information.
Does Windows 11 run better than Windows 10? ›In short, updating to Windows 11 means a more snappy experience where apps load faster and your PC wakes from sleep with ease. Windows 10 fast, but Windows 11 is just a bit faster.
Will Windows 10 Stop being supported? ›The Windows 10 support lifecycle has a five-year mainstream support phase that began on July 29, 2015, and a second five-year extended support phase that begins in 2020 and extends until October 2025.
Is Windows 10 still supported by Microsoft? ›What does it mean for Microsoft to end support for Windows 10? As it did with Windows 7 in January 2020, Microsoft will pull active support for Windows 10 in 2025. You'll still be able to use the software, but you won't get any more security updates. There also won't be any new features added to the software.
Can I still get Windows 10 for free 2022? ›How to Upgrade to Windows 10 for Free in 2022 - YouTube
Should I update to Windows 11 now? ›
Upgrade to Windows 11 if security is your priority — If you're someone who prefers to stay updated on security, Windows 11 should serve you well. Windows 10 will continue to get security updates until October 14, 2025. Windows 11, on the other hand, has a stronger security base from the ground up.
How many GB is Windows 11? ›If you're upgrading directly from Windows 10 to Windows 11, the download size is about 3.5 GB. And, you need to make sure that you have at least 64GB of free space. If you install Windows 11 using an . ISO file, plan on having 25 GB of free space at least.
Does installing Windows 11 delete everything? ›Most people are wondering about this issue - will upgrading Windows 10 to Windows 11 erase all my files? The answer is No. As long as you select "Keep personal files and apps" during Windows Setup, you shouldn't lose anything.
Is Windows 10 version 21H2 the same as Windows 11? ›Back in November 2021, Microsoft started rolling out Windows 10 November 2021 Update (version 21H2) to compatible devices. Unlike Windows 11 version 21H2, Windows 10 November 2021 Update includes minor improvements only, such as new virtualization features, Windows Subsystem for Linux changes and other fixes.
Which Windows 10 features are removed in Windows 11? ›Named groups and folders of apps are no longer supported and the layout is not currently resizable. Pinned apps and sites will not migrate when upgrading from Windows 10. Live Tiles are no longer available. For glanceable, dynamic content, see the new Widgets feature.
Is Windows version 21H2 Windows 11? ›Version 21H2 (original release)
The original version of Windows 11 (also known as version 21H2 and codenamed "Sun Valley") was released in October 2021. It carries the build number 10.0.22000. The first public preview build was made available to Windows Insiders who opted in to the Dev Channel on June 28, 2021.